SPN SERIES

PUSH-BUTTON BOXES

• Watertight boxes made of AISI 304L steel (Wnr 1.4307);
• External finish in FINE SATIN, medium Scotch-brite type;
• Cover with welded and finished edges, screwed to the body of the box;
• d=22.5 mm holes in the cover for mounting the push-button.
• Sheet thicknesses of body and cover from 10/10 mm to 12/10 mm depending on the dimensions;
• Polyurethane sealing gasket applied by a robotic system;
• Provision on the rear side of the body for wall mounting with blind M5 threaded holes.

PLUS ON REQUEST

Material: AISI 316L (Wnr 1.4404).
Drilling: according to the drawing on the door, the top and the sides.
Dimensions: special.
Seals: silicone.