Control Boxes and Support Systems

MPGAMMA control boxes are designed to contain command and control devices close to the operator. To be used in combination with the support arm system with 48 mm and 60 mm diameter, equipped with fixed or swivel joints. In addition, the arms can be supplied in different shapes "L, I, C, S, K" and in different sizes. Each control box can be manufactured and drilled according to specific drawings supplied by the customer, customized in every detail and completed thanks to a wide range of accessories.

Catalog

Series available

KC Series - Control Boxes

CONTROL BOX for intercom KC SERIES Made of stainless steel AISI 304L (Wnr 1.4307). Scotch-brite type fine satin external finish

KC "SKIN" Series - Control Boxes

KCS “SKIN” SERIES PLUS ON REQUEST Material: AISI 316L (Wnr 1.4404).Drilling: according to the drawing

Y Series - Support Arms

Y SERIES PLUS ON REQUEST The development and geometric shape of the arms are based

FAQ’s

Frequently Asked Questions

It is a small enclosure with push-buttons and controls suspended via a support system to operate the machine from a comfortable, mobile position.

They are arms, tubes and joints that hold and orient control boxes, consoles or operator desks, allowing height, reach and angle to be adjusted.

Stainless steel AISI 304/316 with usual IP66 protection, for industrial and hygienic environments.

Yes, the systems are modular and allow tubes, elbows and joints of different lengths and diameters to be combined according to the application.

For machine-side control in production, packaging and process lines where the operator needs mobility and good visibility.

Do you need a customized configuration?

Our team will advise you, and we will manufacture the enclosure according to your plans, with delivery available throughout Spain.